EMA5-2026-522161445
Spill protection - conveyor height Spill protection (netting or spill protection side panels) is installed in conveyors at 2100mm from the floor (measured from floor to bottom of conveyor frame) and higher, and on both sides of the conveyor. Vertical coverage of the spill protection is 2/3 of the tallest parcel, measured from the conveying surface.
Pending
Asset
Type: Safety
Asset ID: EMA5-Conveyor Systems - MHE-1
FC: EMA5 /
People
Found by: anmgnz@amazon.es
Last update by: okaforug@amazon.co.uk
Vendor: TGW
Timeline
Identified: 5/22/2026
Last update: 6/1/2026
Completed: —
Verified: —
Description
Spill protection - conveyor height Spill protection (netting or spill protection side panels) is installed in conveyors at 2100mm from the floor (measured from floor to bottom of conveyor frame) and higher, and on both sides of the conveyor. Vertical coverage of the spill protection is 2/3 of the tallest parcel, measured from the conveying surface.
Comments history
6/1/2026: (okaforug) Team Assigned to has been changed from Amazon Ops Eng to TGW so the status is being reset to Pending 5/22/2026: (anmgnz) The sorter structure is protected with side netting, but the mesh gaps are too big and parcels can fall from height. All sorter: Ensure protection is made in accordance with the below standard: EN619: Clause 4.2.6 Protection against falling or ejected objects Conveyors shall be designed to prevent persons from being injured by falling conveyed loads, e.g. by side guards and/or under guards such as rope nettings, wire mats, plates or barriers.
